NOSÀS Industrial Brushes | If you can imagine...we can make them

	If you can imagine...we can make them



Applications
3M Non woven rolls
HITEC Brush rolls
NOSÀS manufacturing services
Engineering service

Masroll Wiper equipments
HOTANI Cleaning & Degreasing equipments

3M Non woven rolls
HITEC Brush rolls
Equipments
Other inquires

hitec_la_ultima_evolucion_en_cepillos

HITEC rolls: The last evolution in rolls

HITEC Brush Rolls are produced by mounting together several Cassette Brushes on a shaft. Each cassette is composed of compressed and glued disks with special high quality multifilament bristles. This provide the product with the following advantages:

Advantages of the Hitec brush rolls:

Life: Longer operating duration due to the high density and multi-bristle quality.

Cleaning effect: Better cleaning effect (2 to 4 times higher than conventional ones) can improve productivity and save on costs. By using Hitec brush rolls, some customers can increase line speed, use half the conventional brushes or switch off the electrolytic panels in their cleaning section (with consequent energy saving costs).

Cassette system = Maintenance efficiency and cost savings.

Highest Brush Density: Due to the metal profile width in conventional brushes, there is a lack of bristles. With the newly developed system of pressed disks, there is a large amount of space to insert more bristles. The Hitec density is up to 75% higher than spiral brushes. Double Cleaning Performances: As a result of the combination of the high density of Hitec Brush Roll and the revolutionary multifilament bristles, the cleaning performances are more than the double of the conventional spiralled brush rolls.		Cleaning and Life diagram: HITEC vs Conventional Brush The HITEC Brush Roll has double the cleaning performances and double the lifetime of a conventional roll. The performance of the HITEC brush is at least 4 times better than the conventional roll!
Condition: Prespray + 1 pass brushing Revolution: 900 rpm Reduction: 3.0 mm Cutting Direction: UpCut NaOH 2% + AD-2000ESP 0.2% (60ºC)	Spray Amount: 0.05 litre/min.mm Prespray Zone: 5 m Perfect Degreasing: L Value= 89.45 Number of Samples: 3 (average value)
Advantages of the Cassette System: Brush Roll Change made by hand
Very easy to remove: 1 roll = 20 min. NO special tools needed NO dressing needed NO gap between shaft and brush hole NO dynamic balancing needed NO shaft transport costs NO need of third shaft Lead time dramatically reduced

© 2008 Nosàs S.A. | A-08238933 – VAT ESA08238933 | Reg. merc. de Barcelona Tomo 1.777, Libro 1.195, Sección 2ª, Folio 1, Hoja 16.287, Inscripción 1ª | Legal Information
Diseño web: FXdisseny

Highest Brush Density:

Advantages of the Cassette System: Brush Roll Change made by hand